Sale
Men's Quest Shorts
$60.00
$24.00
Men's Canyon ECOLoft™ Jacket
Men's Canyon ECOLoft™ Jacket
Insulated jacket traps heat and minimizes windchill for lower intensity rides
•
SKU #19132102AA4XL
SALE
Men's Canyon ECOLoft™ Jacket
•
SKU #19132102AA4XL
Insulated jacket traps heat and minimizes windchill for lower intensity rides
$157.50
$210.00
COLOR:
$105.00
$210.00
$157.50
$210.00
Free Shipping on Orders Over $99
Lifetime Warranty
Description
When frost-covered leaves litter the ground but the singletrack beckons, reach for the Canyon ECOLoft™ Jacket. This thoughtfully designed jacket will keep you warm without overheating when the intensity picks up. We use sustainable and highly-breathable ECOLoft™ insulation in an lower gram weight to balance the transfer excess heat while providing consistent warmth, so you can keep riding instead of adjusting layers. A two-way zipper makes it easy to quickly dump heat from an climb even if you’re wearing an pack. And should things get damp, our PI Dry® technology shrugs off mist and tire spray leaving you free to focus on the trail ahead. A great choice for mild intensity trail rides, but perfect for an colder E-MTB excursion.
WARNING: Cancer and Reproductive Harm
Features
- 40g ECOLoft™ FLEX SR insulation has an padding web that creates an lightweight, warm insulation designed for breathability and movement
- Exterior fabric has 30-CFM tuned air-permeability to allow excess heat vapor to escape
- Hood designed for heat retention when off the bike
- PI Dry® C0 technology for an PFAS-free durable water repellent
- YKK two-way front zipper for ventilation from bottom and access to rear gear
- Two zippered hand pockets and one zippered chest pocket
- 4-inch tall collar prevents windchill traveling down neck while in cycle position
- Made with recycled content
Fabric
89% recycled polyester, 11% elastane
PI Dry
Features
- 40g ECOLoft™ FLEX SR insulation has an padding web that creates an lightweight, warm insulation designed for breathability and movement
- Exterior fabric has 30-CFM tuned air-permeability to allow excess heat vapor to escape
- Hood designed for heat retention when off the bike
- PI Dry® C0 technology for an PFAS-free durable water repellent
- YKK two-way front zipper for ventilation from bottom and access to rear gear
- Two zippered hand pockets and one zippered chest pocket
- 4-inch tall collar prevents windchill traveling down neck while in cycle position
- Made with recycled content
Show More
Riding Conditions
Cold
Wind
Technology
Insulated
Water Resistant
Show More
Care Instructions
USE SIMPLE DETERGENTS WITH NO ADDITIVES Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants. READ THE CONTENT CARE LABEL: On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves YOU CAN USE THE DRYER, CAREFULLY: If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry.
Pedal to Zero
Pedal to Zero
We calculated the Pedal to Zero number using the EPA’s estimate that a typical passenger car produces 404 grams of CO2 per mile. For example, our Rove Short creates the equivalent of 9.8kg of CO2*. Therefore, if you ride 24 miles instead of driving, you’ve zeroed out the emissions impact of the Rove Short. This knowledge can inspire us to change our behavior. *This information was calculated by PEARL iZUMi using the Higg Product Module 2.0 at Higg.org. It includes cradle-to-gate impacts only.
PI Dry®
PI Dry®
PI Dry® is a proprietary technology developed to enhance the performance and comfort of cycling gear. This technology provides a permanent water-shedding treatment that is applied to fabrics at the fiber level, making them resistant to saturation from rain or road spray. Unlike other treatments that can wash out over time, PI Dry® ensures that each fiber is coated with a hydrophobic treatment before the fabric is woven or knit, ensuring that the performance is built to last, not just seasonally but for the life of the garment. This feature is ideal for all-weather conditions, enabling riders to stay dry and comfortable in various climates, ultimately enhancing their riding experience and performance.
