Sale
Men's Quest Shorts
$60.00
$24.00
Men's AmFIB® Lite Bib Tights
Men's AmFIB® Lite Bib Tights
Bib tight with no chamois has softshell and fleece to protect from wind and release heat
•
SKU #11112214021S
Men's AmFIB® Lite Bib Tights
•
SKU #11112214021S
Bib tight with no chamois has softshell and fleece to protect from wind and release heat
$165.00
$165.00
COLOR:
Free Shipping on All Orders
Lifetime Warranty
Description
When your ride starts cold but you heat up fast, the Men's AmFIB® Lite Bib Tights strike the perfect balance between protection and breathability. Designed for road and gravel cyclists who need just enough weather coverage, these cycling bib tights feature strategic AmFIB® softshell panels that block wind and water where it matters most—on the thighs and knees—while the ELITE ThermaFleece releases body heat through the rear panels.
The back uses DWR-treated ELITE ThermaFleece to regulate body heat and wick moisture so you stay dry and comfortable even when pushing the pace. Raw-edge bib straps lay flat under layers for a smooth, bulk-free fit, while PI Dry® C0 technology repels light rain and road spray with a sustainable, PFAS-free finish.
These bib tights are designed without a chamois, making them ideal for layering over your favorite bike liner. For visibility in low light, BioViz® reflective elements on the calves and hips shine up to 100 meters—even when worn with booties.
Browse more cycling bib tights and check out our men's road cycling jerseys to complete your cold-weather kit.
Features
- Front panels use high-stretch AmFIB® softshell fabric protects from wind and water
- No chamois pad
- Lofted thermal fleece lining provides cozy wicking layer next to skin
- PI Dry® C0 technology for an PFAS-free durable water repellent
- High-stretch fabric at ankle removes need for bulky zippers and provides svelte interface with shoe covers or boots
- Laser-cut raw edge bib upper construction for soft transition to skin with superior stretch to accommodate wide range of torso lengths
- Made with recycled content
- BioViz® powerful reflective elements that reach 100 meters for night visibility
- Pedal to Zero™: Going by bike 27mi / 43km offsets the climate impact of this garment
- 28.5" inseam
Fabric
Main Body: 89% recycled polyester, 11% elastane | Back Leg Panel, Front Leg Panel, & Waistband Yoke: 56% recycled nylon, 30% recycled polyester, 14% lycra® elastane | Bib Upper: 75% nylon, 25% elastane
Features
- Front panels use high-stretch AmFIB® softshell fabric protects from wind and water
- No chamois pad
- Lofted thermal fleece lining provides cozy wicking layer next to skin
- PI Dry® C0 technology for an PFAS-free durable water repellent
- High-stretch fabric at ankle removes need for bulky zippers and provides svelte interface with shoe covers or boots
- Laser-cut raw edge bib upper construction for soft transition to skin with superior stretch to accommodate wide range of torso lengths
- Made with recycled content
- BioViz® powerful reflective elements that reach 100 meters for night visibility
- Pedal to Zero™: Going by bike 27mi / 43km offsets the climate impact of this garment
- 28.5" inseam
Show More
Riding Conditions
Cold
Wind
Technology
Insulated
Water Resistant
Wind Protection
Show More
Care Instructions
Wash with simple detergents without additives (Clear or Free). Wash gentle cycle. Close all zippers and hook and loop closures (“Velcro”). Tumble dry low (fabric should not be hot to the touch). When in doubt (or to save energy) hang dry. Do not use dryer sheets. Products with scents, softeners, etc. will inhibit performance of technical fabrics.
Pedal to Zero
Pedal to Zero
We calculated the Pedal to Zero number using the EPA’s estimate that a typical passenger car produces 404 grams of CO2 per mile. For example, our Rove Short creates the equivalent of 9.8kg of CO2*. Therefore, if you ride 24 miles instead of driving, you’ve zeroed out the emissions impact of the Rove Short. This knowledge can inspire us to change our behavior. *This information was calculated by PEARL iZUMi using the Higg Product Module 2.0 at Higg.org. It includes cradle-to-gate impacts only.
PI Dry®
PI Dry®
PI Dry® is a proprietary technology developed to enhance the performance and comfort of cycling gear. This technology provides a permanent water-shedding treatment that is applied to fabrics at the fiber level, making them resistant to saturation from rain or road spray. Unlike other treatments that can wash out over time, PI Dry® ensures that each fiber is coated with a hydrophobic treatment before the fabric is woven or knit, ensuring that the performance is built to last, not just seasonally but for the life of the garment. This feature is ideal for all-weather conditions, enabling riders to stay dry and comfortable in various climates, ultimately enhancing their riding experience and performance.
AmFIB® Thermal Softshell
AmFIB® Thermal Softshell
The AmFIB® Thermal Softshell is a cutting-edge fabric technology designed to optimize comfort and performance in cold-weather cycling conditions. The fabric combines a thermal fleece on the inside for warmth with a weather-resistant softshell exterior that blocks wind and repels water, ensuring riders stay dry and comfortable. AmFIB® is engineered for durability and flexibility, allowing for a full range of motion while maintaining breathability. This makes it ideal for cyclists who refuse to let the harsher conditions of winter stop their riding adventures.